ADDR_ERR_CD |
ADDR_ERR_DESC |
REJ_IND |
ERROR_CODE_DETAIL |
ERROR_CODE_EXAMPLE |
E101 |
LAST LINE IS BAD OR MISSING |
Y |
IN THE INPUT DATA, THE SOFTWARE CANNOT FIND EITHER (1) LAST-LINE OF DATA AT ALL, OR (2) ONLY A CITY NAME, OR (3) ONLY A STATE/PROVINCE. THERE IS NOT ENOUGH LAST-LINE DATA TO JUSTIFY GOING FURTHER WITH THE ADDRESS ASSIGNMENT PROCESS. |
ADDRESS LINE: 5500 EVITA CT LAST LINE: AGOURA, BLANK STATE AND ZIP |
Y |
E212 |
No city and bad ZIP/postal code |
Y |
The input data does not include a recognizable city name, so a look-up in the city directory is impossible. The input data includes an invalid zip or postal code, so no match for it can be found in the ZIP carrier file directory. The software does not go forward with address line look-up, because it cannot determine in which postal district the address lies. |
Address Line: 100 Main St Last Line: NY 00201, blank city |
Y |
E213 |
Bad city, valid state/province, and no ZIP/postal code |
Y |
The input data includes a valid state/province and something that might be a city name, but no match for them can be found in the City directory. The input data does not include a ZIP/Postal code, so no look-up in the zip carrier directory is possible. |
Address Line: 100 Main St Last Line: Else WI There is no city name resembling "Else" listed in Wisconsin |
Y |
E214 |
Bad city and bad ZIP/postal code |
Y |
The input data includes something that might be a city name, and something that might be a ZIP code. However, both of them are invalid, because no match for either of them can be found in the city and ZIP carrier directories. |
Address Line: PO Box 1141 Last Line: Mikati, NY 00236 the Zip code is not valid and Mikati is not listed as a city name. |
Y |
E216 |
Bad ZIP, can't determine which city match TO SELECT |
Y |
THE input DATA may OR may NOT include a ZIP code. IF a ZIP IS input, NO match FOR it can be FOUND IN THE ZIP carrier DIRECTORY. WHEN looking up THE input city AND STATE IN THE city DIRECTORY, THE software finds two OR more matching cities IN THE STATE. Because THE input ZIP IS bad OR missing, THE software cannot break THE tie BETWEEN possible city matches, nor dtermine which ZIP TO ASSIGN. |
Address Line: 500 Main St LAST Line: Deephaven MN Deephaven IS a suburb AND served BY THE Excelsior post office(55331) AND THE Wayzata office (55391). THE street NAME "Main" IS NOT listed IN either OF those ZIP's. |
Y |
E302 |
No primary address line parsed |
Y |
The parsing program finds nothing in the input record that can be recognized as a primary address line. |
Address Line: Air-5004 RM 278 JP-2 LastLine: Washington DC 20361 This record does not contain a recognizable address line. |
Y |
E412 |
Street name not found in directory |
Y |
No match for the input street name can be found in the national directory. Perhaps the street name is misspelled or badly abbreviated. If the input address line contains garbage that might be interpreted as a part of the street name, this also can result in E412. |
Address Line: 100 baltimore Lane Last Line: hokins MN 55305 "Baltimore" is not listed as a street name in this city. Some streets resemble it, but none closely enough for the software to be confident of a match. |
Y |
E413 |
Possible street name matches too close to choose one |
Y |
The input data does not have a matching street name and the national directory contains two or more street names that resemble the input street name. However, the resemblance between potential matches is so close that the software cannot choose one over another. |
Address Line: 85-100 Ala Akua St Last Line: Waianae HI 96792 The two possible matches are: "Ala Akau Street" and "Ala Walua Street". |
Y |
E420 |
Primary range is missing |
Y |
The software finds nothing in the input address line that can be recognized as a primary range (House number). This may mean the primary range is truly missing, or that is cannot be recognized. |
Address Line: Hwy Cntr 70 Last Line: Webster IA 54893 |
Y |
E421 |
Primary range is invalid for the street/route/building |
Y |
The input data submitted according to the national directory, the primary range address(house number) is invalid. That is, it does not fall within any of the ranges listed for that street, route, or building. |
Address Line: 3600 County Road K Last Line: Belgium WI 53004 "3600" is not list as a valid primary range for "County Road K". |
Y |
E422 |
Predirectional needed, input is wrong or missing |
Y |
The zip+4 directory indicates that a predirectional is required to choose between possible matches to make an assignment. |
Address Line: 112 Main St Last Line: Los Angeles CA 90012 The primary range is invalid for both North Main Street and South Main Street |
Y |
E423 |
Suffix needed, input is wrong or missing |
Y |
The zip+4 directory indicates that a suffix is required to choose between possible matches. |
Address Line: 5016 Emerald Forest St. Last Line: Austin TX 78745 The primary range is valid for both "Emerald Forest Drive" and "Emerald Forest Circle". There is no listing for "Emerald Forest Street". |
Y |
E425 |
Suffix and directional needed, input is wrong or missing |
Y |
The zip+4 directory indicates that both a suffix and a directional are required to choose between possible matches. However, either input data does not include a suffix and directional, or the input suffix and directional are invalid (not among those listed for the street). |
Address Line: 460 Post Oak Place Last Line: Houston TX 77024 For this address, the directory lists three records that might match if the suffix were valid and the directional was available. |
Y |
E427 |
[Post] Directional needed, input is wrong or missing |
Y |
The national directory indicates that a postdirectional is required to choose between possible matches. However, either the input data does not include a postdirectional, or the input postdirectional is invalid(not among those listed for the street). |
Address Line: 365 Ave San Jose Last Line: Aibonito PR 00705 The primary range is valid for both "Ave San Jose West" and for "Ave San Jose East" |
Y |
E428 |
Bad ZIP, can't SELECT an address match |
Y |
THE input ZIP IS missing OR invalid. THE city DIRECTORY shows that THE input city/STATE covers two OR more ZIP codes. IN THE ZIP+4 DIRECTORY, THE software can find matches FOR THE address line IN AT LEAST two OF those ZIP codes. THE software can't USE THE bad input ZIP TO break THE tie ON THE address line, nor USE THE address line TO CHOOSE a good ZIP. |
Address Line: 268 S Ave LAST Line: Syracuse NY THE address IS listed IN two ZIP codes, IN THE same city. |
Y |
E429 |
Bad city, can't SELECT an address match |
Y |
THE input city NAME IS missing OR invalid. THE ZIP carrier DIRECTORY show that THE input ZIP applies TO two OR more city names. IN THE ZIP+4 DIRECTORY, THE software can find matches FOR THE address line IN AT LEAST two OF those cities. THE software can't USE THE input city TO break THE tie ON THE address line, nor USE THE address line TO CHOOSE a city NAME. |
Address Line: 39 Highland Ave. LAST Line: Eastchester NY 10709 THE address line IS invalid IN Eastchester, it IS valid IN two neighboring cities. |
Y |
E430 |
Possible address line matches too close to choose one |
Y |
The national directory contains two or more address lines that resemble the input address line. However, the resemblance is too close to choose. |
Address Line: 499 Sangamon St Last Line: Chicago IL This record has a valid range both for "South Sangamon St" in ZIP 60607, and "North Sangamon St" in ZIP 60622. |
Y |
E431 |
Urbanization needed, input is wrong or missing |
Y |
The ZIP+4 directory contains two or more address lines that resemble the input address line. To break the tie, the Puerto Rican urbanization is needed. The input address line may also contain an incorrect urbanization. This error code applies to Puerto Rican addresses only. |
Address Line: Calle 2 24 Urb Radio Last Line: Arecibo PR 00612 The primary address is listed in two different urbanizations, "Urd Radioville" and "Urb Vista Del Atlantico". The resemblance between "Radio" and "Radiov |
Y |
E432 |
The address conflicts with the postal code, different postal code |
Y |
The national directory indicates that the street in the incoming address has a different postal code than what is listed. This error code applies to Canadian records only. |
Address Line: RR 1 Last Line: Truro NS B2N 5B1 RR 1 does not exist within the given postal code. "RR 2" exists within this postal code. The given address exists within B2N 5A9. The choice is too clos |
Y |
E433 |
Address conflicts with the postal code, different street name exists for input postal code |
Y |
The national directory indicates that the postal code from the incoming address contains a different street name than the one input; the choice is too ambiguous for the software to correct the address. This error code applies to Canadian records only. |
Address Line: 7250 St Jacques O Last Line: Montreal QC H4B 1T4 "7250 Boul De Ste-Anne-De-Bellevue", not "7250 St Jacques O" matches the given postal code of "H4B 1T4". "7250 Rue Saint-Jacques" exists within a different postal |
Y |
E434 |
No street assignment was possible, there was a duplicate postal code match |
Y |
The national directory indicates that several postal codes match the input address, and either the lack of a postal code or an incorrect postal code makes it impossible for the software to assign an address. This error code applies to Canadian records only. |
|
Y |
E435 |
No street assignment, no postal code |
Y |
The national directory indicates that there is no match possible for the given street address, and it is not possible for the software to make an assignment based on the postal code because no postal code was given. This error code applies to Canadian records only. |
|
Y |
E436 |
No street assignment, postal code not matched |
Y |
The national directory indicates that there is no match possible for the given street address, and the software could not match the given postal code to any address listed in the directory. |
|
Y |
E437 |
Multiple match, different directory areas |
Y |
The national directory indicates that this address and last line combination are found in more than one directory area index. This error code applies to Canadian records only. |
Address Line: PO Box 1 Last Line: Alma the software finds "PO Box 1" within the city of "Alma" listed in more than one province. Since the software doesn't know which province IS corre |
Y |
E439 |
Address found in Early Warning System directory |
Y |
Address found in Early Warning System directory |
|
Y |
E450 |
High rank has out-of-range suite |
Y |
This error code indicates that the incoming address listed in the national directory contains units (suites, apartment units), but that the unit designator in the incoming address is either missing, or does not fall within the range listed in the directory. This applies to Canadian records only. |
Address Line: 727 1 Ave St Last Line: Calgary AB T2P 2V3 The national directory indicates that this address contains units, but the incoming address doesn't contain a unit designator. |
Y |
E451 |
High rank has out-of-range PO box |
Y |
The national directory indicates that the Box number input does not fall within the range of Box numbers for the given city. This error code applies to Canadian records only. |
Address Line: PO Box 200 Last Line: Abee AB The range for PO Box numbers in "Abee" goes only from 1 through 120. |
Y |
E452 |
PO Box vs. civic postal code mismatch |
Y |
The national directory indicates that the postal code for the incoming street address matches an LVR(large volume receiver) PO Box, or LVR street address. This error code applies to Canadian records only. |
Address Line: 100 Main St Last Line: Winnipeg MB R3W 4C4 Within the given postal code, only a PO Box is listed in the directory for the addressee. |
Y |
E453 |
Multiple suite ranking conflict |
Y |
The national directory indicates that the suite range does not include the suite listed in the incoming address, or that too many conflicts exist with other possible address assignments. This error code applies to Canadian records only. |
Address Line: 2000 Steeles Ave W Ste 200 Last Line: Concord ON L4K 3E9 The national directory lists only "2" in the range for suites for this postal code, not "200". |
Y |
E500 |
Other error |
Y |
E500 is a catch-all error code assigned when no more specific code can be assigned. Usually it indicates that no potential match meets the minimum confidence level, or that there is an unresolved tie between two or more potential matches. |
|
Y |
E501 |
Foreign address |
Y |
The address is foreign - that is, not within the domestic U.S., territories, or possessions. |
Address Line: 123 Kettle Rd Last Line: Toronto Canada |
Y |
E502 |
Input record entirely blank |
Y |
All of the fields used in address look-up are blank. There may be data in other, non-address fields. |
|
Y |
E503 |
ZIP not in area covered by parital ZIP+4 directory |
Y |
The input address lies outside the area covered by the ZIP+4 directory. This error usually occurs when a state or regional directory is being used, or a custom directory was created. The error should not occur when using the national directory. If an error has occurred, it should be reported to the USPS National customer suport center. Some errors may be caused by ZIP code realignments. |
|
Y |
E504 |
Overlapping ranges in ZIP+4 directory |
N |
The address line matches to at least two records in the national directory. The ranges of those directory records overlap, and the software cannot break the tie. |
Address Line: 6100 Cnty Rd 125 Last Line: Terrell TX 75160 The ZIP+4 directory contains one record covering the range "6100 to 6199", and another covering "6100 to 7599". This error code indicates a flaw in the ZI |
Y |
E505 |
Matched to undeliverable default record |
N |
Matched to undeliverable default record |
|
Y |
E600 |
Marked by USPS as unsuitable for delivery of mail |
N |
According to the USPS, no delivery to this address is possible. The address is listed in the national directory, but the record is tagged as undeliverable by the USPS. Most often it might be a cemetary, parking ramp, or condemned building. |
|
Y |
E601 |
Primary number does not DPV confirm, ZIP+4 removed |
Y |
Primary number does not DPV confirm, ZIP+4 removed |
|
Y |
E901 |
Invalid Subscriber EBID. Either the Subscriber EBID in the bulk submission record is invalid or the value does not match the subscriber FTP folder where it was uploaded. |
Y |
This error code is assigned when the submitted file contains a subscriber EBID that does not match one that is listed in the AGIIS directory. This error would occur if the information in the field has been typed incorrectly, is a blank field, or is simply does not exist as a valid subscriber EBID in AGIIS. This error can also be raised when the Subscriber EBID in the bulk submission record does not match the subscriber FTP folder where it was uploaded. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
Y |
E902 |
Invalid submission code. Either the value is invalid or it is a recognized value that requires special authorization for use. |
Y |
This error code is assigned when the submitted file contains information in the submission code field that is not a recognized code, is a blank field, or is a recognized value that requires special authorization for use. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
Y |
E903 |
Invalid submission date |
Y |
This error code is assigned when the information has been data entered incorrectly (i.e.format not correct) or is a blank field. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
N |
E904 |
Missing or incomplete name information |
Y |
This error code is assign when the first name field and/or firm field is blank. The record must have a firm name and/or first and last name field populated. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
N |
E905 |
Missing or incomplete street address information |
Y |
This error code is assigned when an address line is blank. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
N |
E906 |
Required data is missing from Bulk transaction: Either the zip/postal code, city, or state is missing\invalid or a Company or Individual Name was missing |
Y |
This error code is assigned when the ZIP/postal code, city and/or state is blank from a Bulk input transaction. Other conditions that raise this error include: 1) the ZIP/postal code is incomplete, either containing less than 5 digits and/or contains alpha characters, 2) Both the business name and individual names were missing from the input transaction. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
Y |
E907 |
Invalid NAPD/HP ID |
Y |
This error code is assigned if the submitted file contains an NAPD/HP id that is not on the directory. This error code is generated from a preprocess check for the validity of the pertinent components of the record. |
|
Y |
E908 |
"CR" designation not sufficient for USPS standards. |
Y |
|
|
Y |
E909 |
Invalid EBID ID |
Y |
|
|
Y |
E910 |
Invalid partner identifier in XML header. The From Partner identifier in the XML header was not found to be associated with a valid AGIIS subscriber. |
Y |
Invalid partner identifier in XML header. The From Partner identifier in the XML header was not found to be associated with a valid AGIIS subscriber. |
|
Y |
E911 |
GLN does not exist in the AGIIS database |
Y |
|
|
N |
E912 |
Bulk transactions not allowed on private entities |
Y |
|
|
N |
EB01 |
Invalid file name or extension on GLN Bulk file. GLN Bulk file names must follow the convention outlined on the AGIIS Web which includes the Subscriber EBID in the file name. |
Y |
|
|
Y |
EB02 |
Record count exceeds the allowed amount for a GLN Bulk file. The maximum record count per file is 10,000. If more than one file is submitted per GLN Bulk processing cycle, the combined record count can't exceed this maximum. |
Y |
Record count exceeds the allowed amount for a GLN Bulk file. The maximum record count per file is 10,000. If more than one file is submitted per GLN Bulk processing cycle, the combined record count can't exceed this maximum. |
|
Y |
EB03 |
Invalid subscriber identifier\subscriber profile for bulk file or web service. The subscriber profile lacks a critical requirement (e.g. AGIIS FTP site setup) to process the transaction. |
Y |
Invalid subscriber identifier\subscriber profile for bulk file or web service. The subscriber profile lacks a critical requirement (e.g. AGIIS FTP site setup) to process the transaction. |
|
Y |
EB04 |
Entity is already in subset with a different proprietary code. Add to subset denied. |
Y |
Entity is already in subset with a different proprietary code. Add to subset denied. |
|
N |
EB05 |
Entity is already in subset with the same proprietary code. Add to subset denied. |
Y |
Entity is already in subset with the same proprietary code. Add to subset denied. |
|
N |
EB06 |
Invalid proprietary code. |
Y |
Invalid proprietary code. |
|
N |
EB07 |
Entity is not in subset. Delete from subset denied. Applies to GLN Bulk and Web Service transactions. |
Y |
Entity is not in subset. Delete from subset denied. Applies to GLN Bulk and Web Service transactions. |
|
Y |
EB08 |
Invalid XML document in bulk file. The XML submitted does not validate against the AGIIS XML schema. |
Y |
Invalid XML document in bulk file. The XML submitted does not validate against the AGIIS XML schema. |
|
Y |
EB09 |
Invalid ASCII character detected in bulk file. All characters must be <= hex 7F. |
Y |
Invalid ASCII character detected in bulk file. All characters must be <= hex 7F. |
|
N |
EB10 |
Invalid delimiter in CSV bulk file. |
Y |
Invalid delimiter in CSV bulk file. |
|
N |
EB11 |
Invalid number of columns in CSV bulk file. |
Y |
Invalid number of columns in CSV bulk file. |
|
N |
EB12 |
Malformed data in CSV bulk file. |
Y |
Malformed data in CSV bulk file. |
|
N |
G001 |
Invalid submission code for GLN Onboarding, submission code must be 2004 |
Y |
Invalid submission code for GLN Onboarding, submission code must be 2004 |
|
N |
G002 |
This record was bypassed for GLN Onboarding because an unexpected error was encountered inPlease match processing. contact Member Services Help Desk for assistance |
Y |
This record was bypassed for GLN Onboarding because an unexpected error was encountered in match processing. Please contact Member Services for assistance |
|
N |
G003 |
Invalid return code for GLN Onboarding stand alone file, return code must be 4008 |
Y |
Invalid return code for GLN Onboarding stand alone file, return code must be 4008 |
|
N |
G004 |
Invalid record length for GLN Onboarding stand alone file, record length must be 696 bytes (fixed length ASCII text file format) |
Y |
Invalid record length for GLN Onboarding stand alone file, record length must be 696 bytes (fixed length ASCII text file format) |
|
N |
G005 |
Invalid identifier found in positions 366-381 of GLN Onboarding stand alone file, the value in this field must be a valid HPID or EBID |
Y |
Invalid identifier found in positions 366-381 of GLN Onboarding stand alone file, the value in this field must be a valid HPID or EBID |
|
N |
S001 |
Either company name or both first name and last name are required |
Y |
|
|
Y |
S002 |
Address compnents are required (street address line 1, zip5) |
Y |
|
|
N |
S005 |
Name and\or Address Name(s) contains all numerics |
Y |
|
|
Y |
S006 |
Company Name OR DBA Name OR Location Name OR Grower First Name OR Grower Middle Name OR Grower Last Name contains a date. |
Y |
Company Name OR DBA Name OR Location Name OR Grower First Name OR Grower Middle Name OR Grower Last Name contains a date. |
Name(s) contain a date. |
Y |
S007 |
Company Name, DBA Name, or Location Name is 1 character in length and therefore invalid. |
Y |
Company Name, DBA Name, or Location Name is 1 character in length and therefore invalid. |
Invalid Business Name, more than 1 character required. |
Y |
S013 |
Name and\or Address starts with a prohibited word, phrase, or special character |
Y |
Name and\or Address starts with a prohibited word or special character |
|
Y |
S014 |
Name and\or Address contains 0'B instead of O'B (like O'BRIAN) |
Y |
|
|
Y |
S019 |
Grower Last Name is 1 character in length and therefore invalid. |
Y |
Grower Last Name is 1 character in length and therefore invalid. |
|
Y |
S036 |
Address components contain a non-display character |
N |
|
|
N |
S037 |
Business name contains a non-display character |
N |
|
|
N |
S038 |
Personal name(s) contain a non-display character |
N |
|
|
N |
S039 |
Entity was determined to be invalid after manual inspection |
Y |
|
|
N |
S040 |
Entity status is required |
Y |
Entity status is required |
|
Y |
S041 |
Entity record source is required |
Y |
Entity record source is required |
|
Y |
S042 |
Entity type is required |
Y |
Entity type is required |
|
N |
S043 |
Entity company name is required |
Y |
Entity company name is required |
|
Y |
S044 |
Entity first name is required |
Y |
Entity first name is required |
|
N |
S045 |
Entity last name is required |
Y |
Entity last name is required |
|
N |
S046 |
Entity location description is required |
Y |
Entity location description is required |
|
N |
S047 |
Entity Phone Number is required for a manufacturer, distributor, retailer, or industry provider |
Y |
Entity Phone Number is required for a manufacturer, distributor, retailer, or industry provider |
|
N |
S048 |
Phone Number must be 10 digits |
Y |
Phone Number must be 10 digits |
|
Y |
S049 |
Entity status is invalid |
Y |
Entity status is invalid. Valid statuses include: I-In Business, O-Out of Business, B-Bought Out, R-Replaced. For an entity add transaction only In Business is allowed. |
|
Y |
S050 |
Entity type is invalid |
Y |
Entity type is invalid |
|
N |
S051 |
System error - entity status codes not loaded |
Y |
System error - entity status codes not loaded |
|
N |
S052 |
System error - entity type codes not loaded |
Y |
System error - entity type codes not loaded |
|
N |
S053 |
Entity bought by/replaced by name or id is required |
Y |
Entity bought by/replaced by name or id is required |
|
Y |
S054 |
Entity bought by/replaced by name or id is invalid |
Y |
Entity bought by/replaced by name or id is invalid |
|
Y |
S055 |
Entity bought by/replaced by status is required |
Y |
Entity bought by/replaced by status is required |
|
N |
S056 |
The Directory Administrator must enter an EBID or GLN for Bought By/Replaced By status |
Y |
The Directory Administrator must enter an EBID or GLN for Bought By/Replaced By status |
|
Y |
S057 |
Entity update denied because the entity is not in subscriber's subset |
Y |
Entity update denied because the entity is not in subscriber's subset |
|
Y |
S058 |
Industry Identifier - Entity ID is required |
Y |
Industry Identifier - Entity ID is required |
|
Y |
S059 |
Industry Identifier Type is missing or invalid |
Y |
Industry Identifier Type is missing or invalid |
|
Y |
S060 |
Location Description is required |
Y |
Location Description is required |
|
Y |
S061 |
Physical Address Line 1 is required |
Y |
Physical Address Line 1 is required |
|
N |
S062 |
Physical Address Postal Code is required |
Y |
Physical Address Postal Code is required |
|
N |
S063 |
Mailing Address Line 1 is required |
Y |
Mailing Address Line 1 is required |
|
N |
S064 |
Mailing Address Postal Code is required |
Y |
Mailing Address Postal Code is required |
|
N |
S065 |
Invalid location type |
Y |
Invalid location type |
|
Y |
S066 |
Location - Entity id is required |
Y |
Location - Entity id is required |
|
Y |
S067 |
Subset - Subscriber Id is required |
Y |
Subset - Subscriber Id is required |
|
Y |
S068 |
Subset - Entity Id is required |
Y |
Subset - Entity Id is required |
|
N |
S069 |
Subset - Invalid or missing industry identifier type |
Y |
Subset - Invalid or missing industry identifier type |
|
Y |
S070 |
Directory Request - Entity status is required |
Y |
Directory Request - Entity status is required |
|
N |
S071 |
Directory Request - Entity type is required |
Y |
Directory Request - Entity type is required |
|
N |
S072 |
Directory Request - Request type is required |
Y |
Directory Request - Request type is required |
|
Y |
S073 |
Directory Request - Request type is invalid |
Y |
Directory Request - Request type is invalid |
|
Y |
S074 |
Prop Cd is already in use. |
Y |
Prop Cd is already in use. |
|
Y |
S075 |
If this entity is a Manufacturer, Distributor, Retailer, End Use Business, or Industry Provider then one of the industry flags must be checked. |
Y |
If this entity is a Manufacturer, Distributor, Retailer, End Use Business, or Industry Provider then one of the industry flags must be checked. |
|
N |
S076 |
Entity contact type is required |
Y |
Entity contact type is required |
|
N |
S077 |
Directory Request - Invalid From/Thru Date in Administrator Directory Request Search. |
Y |
Directory Request - Invalid From/Thru Date in Administrator Directory Request Search. |
|
Y |
S078 |
Phone number is invalid |
Y |
The phone number is invalid |
|
Y |
S079 |
Directory Request - Notes text is over 4000 characters |
Y |
Directory Request - Notes text is over 4000 characters |
|
Y |
S080 |
This entity already has a pending enumeration. Only 1 pending enumeration at a time is allowed. |
Y |
This entity already has a pending enumeration. Only 1 pending enumeration at a time is allowed. |
|
N |
S081 |
Prop Cd is required. |
Y |
Prop Cd is required. |
|
Y |
S082 |
A Primary Category is required. |
Y |
A Primary Category is required. |
|
Y |
S083 |
Additional categories are not allowed when Primary Category is 'Other'. |
Y |
Additional categories are not allowed when Primary Category is 'Other'. |
|
Y |
S084 |
If the Primary category is seed then a crop must be selected. |
Y |
If the Primary category is seed then a crop must be selected. |
|
Y |
S085 |
Out of business entity has been inactivated |
Y |
Out of business entity has been inactivated |
|
N |
S086 |
Entity with invalid address has been inactivated |
Y |
Entity with invalid address has been inactivated |
|
N |
S087 |
Entity Status cannot be Replaced, Bought Out or Out of Business to activate an entity or to add a new entity.. |
Y |
Entity Status cannot be Replaced, Bought Out or Out of Business to activate an entity or to add a new entity.. |
|
Y |
S088 |
Update rejected because the entity is inactive |
Y |
Update rejected because the entity is inactive |
|
Y |
S089 |
The format of the Longitude in incorrect, use Help to find the correct format. |
Y |
The format of the Longitude in incorrect, use Help to find the correct format. |
|
Y |
S090 |
The format of the Latitude in incorrect, use Help to find the correct format. |
Y |
The format of the Latitude in incorrect, use Help to find the correct format. |
|
Y |
S091 |
Personal name update is not permitted for this entity type |
Y |
Personal name update is not permitted for this entity type |
|
N |
S092 |
Company name is not permitted for this entity type |
Y |
Company name is not permitted for this entity type |
|
N |
S093 |
The physical location must be specified. |
Y |
|
|
Y |
S094 |
The mailing location must be specified. |
Y |
|
|
Y |
S095 |
The postal code is required. |
Y |
|
|
N |
S096 |
Prop Code is required |
Y |
Prop Code is required |
|
Y |
S097 |
Bought Out/Replaced Industry ID cannot be the same ID as the entity being updated |
Y |
Bought Out/Replaced Industry ID cannot be the same ID as the entity being updated |
|
Y |
S098 |
An enumeration request is not permitted against an inactive entity. Submit a request to reactive the entity, then request enumeration. |
Y |
An enumeration request is not permitted against an inactive entity. Submit a request to reactive the entity, then request enumeration. |
|
N |
S099 |
When a grower name is entered, both last name and first name are required |
Y |
When a grower name is entered, both last name and first name are required |
|
Y |
S100 |
Invalid entry, the original deactivation notes can't be changed. You are only allowed to append new deactivation notes. |
Y |
Invalid entry, the original deactivation notes can't be changed. You are only allowed to append new deactivation notes. |
|
Y |
S101 |
Deactivation notes are required to set the record status to inactive. |
Y |
Deactivation notes are required to set the record status to inactive. |
|
Y |
S102 |
License Import Error - See text for detail |
Y |
License Import Error - See text for detail |
|
Y |
S103 |
Agreement Import Error - See text for detail |
Y |
Agreement Import Error - See text for detail |
|
Y |
S104 |
Product Import Error - See text for detail |
Y |
Product Import Error - See text for detail |
|
Y |
S105 |
Entity Import Error - See text for detail |
Y |
Entity Import Error - See text for detail |
|
N |
S107 |
Entity not found for license |
Y |
Entity not found for license |
|
Y |
S108 |
Internal error looking up identifier |
Y |
Internal error looking up identifier |
|
Y |
S110 |
Cannot add licenses for other subscribers |
Y |
Cannot add licenses for other subscribers |
|
Y |
S111 |
Error updating license |
Y |
Error updating license |
|
Y |
S112 |
XML file import error, subscriber ftp folder and subscriber in XML header do not match |
Y |
XML file import error, subscriber ftp folder and subscriber in XML header do not match |
|
Y |
S113 |
ActionRequest not specified for license |
Y |
ActionRequest not specified for license |
|
Y |
S114 |
License not found in directory |
Y |
License not found in directory |
|
Y |
S115 |
Delete Action Request specified for license not in directory |
Y |
Delete Action Request specified for license not in directory |
|
Y |
S116 |
Replace Action Request specified for license not in directory |
Y |
Replace Action Request specified for license not in directory |
|
Y |
S117 |
Add Action Request specified for existing license |
Y |
Add Action Request specified for existing license |
|
Y |
S118 |
In License Import, only one identifier can be specified for an entity |
Y |
In License Import, only one identifier can be specified for an entity |
|
Y |
S119 |
Invalid Effective Date for license |
Y |
Invalid Effective Date for license |
|
Y |
S120 |
Invalid Expiration Date for license |
Y |
Invalid Expiration Date for license |
|
Y |
S121 |
Invalid Prohibited Date for license |
Y |
Invalid Prohibited Date for license |
|
Y |
S122 |
Agreement code is required |
Y |
Agreement code is required |
|
Y |
S123 |
License code is required |
Y |
License code is required |
|
Y |
S124 |
Effective date is required |
Y |
Effective date is required |
|
Y |
S125 |
Entity does not exist |
Y |
Entity does not exist |
|
Y |
S126 |
Entity is inactive |
Y |
Entity is inactive |
|
Y |
S128 |
ActionRequest not specified for agreement |
Y |
ActionRequest not specified for agreement |
|
Y |
S129 |
Agreement not found in directory |
Y |
Agreement not found in directory |
|
Y |
S130 |
Delete Action Request specified for agreement not in directory |
Y |
Delete Action Request specified for agreement not in directory |
|
Y |
S131 |
Replace Action Request specified for agreement not in directory |
Y |
Replace Action Request specified for agreement not in directory |
|
Y |
S132 |
Add Action Request specified for existing agreement |
Y |
Add Action Request specified for existing agreement |
|
Y |
S133 |
Internal error updating agreement |
Y |
Internal error updating agreement |
|
Y |
S135 |
Subscribers security list can't be specified for Listmode=Open. Subscribers security list can't be specified for Listmode=Open (applies to Agreement Security and Product Security) |
Y |
Subscribers security list can't be specified for Listmode=Open (applies to Agreement Security and Product Security) |
|
Y |
S136 |
Duplicate entry specified in Subscribers security list for subscriber EBID |
Y |
Duplicate entry specified in Subscribers security list for subscriber EBID |
|
Y |
S137 |
Internal error deleting Agreement Code |
Y |
Internal error deleting Agreement Code |
|
Y |
S138 |
Invalid Subscriber Industry Code Identifier in Subscriber Security List (applies to Agreement Security or Product Security) |
Y |
Invalid Subscriber Industry Code Identifier in Subscriber Security List (applies to Agreement Security or Product Security) |
|
Y |
S139 |
From subscriber not in directory |
Y |
From subscriber not in directory |
|
N |
S140 |
Agreement name is required |
Y |
Agreement name is required |
|
Y |
S141 |
Agreement cannot be deleted since licenses exist |
Y |
Agreement cannot be deleted since licenses exist |
|
Y |
S142 |
The Owner Subscriber ID for this Agreement code is required |
Y |
The Owner Subscriber ID for this Agreement code is required |
|
Y |
S143 |
The Subscriber ID to be secured for this Agreement code is required |
Y |
The Subscriber ID to be secured for this Agreement code is required |
|
Y |
S144 |
Product Subset Import Error - See text for detail |
Y |
Product Subset Import Error - See text for detail |
|
Y |
S145 |
Invalid GLN submission file record length. |
Y |
Invalid GLN submission file record length. This can be due to a malformed GLN submission record or a record that contains invalid UTF-8 characters. |
|
Y |
S146 |
Invalid GLN |
Y |
Invalid GLN, GLN must be 13 digits |
|
Y |
S147 |
Invalid GLN check digit |
Y |
Invalid GLN check digit |
|
Y |
S148 |
Either Company Name or Grower name is required for GLN entities. Entities with the Entity Type of Grower require a Grower Name. |
Y |
Either Company Name or Grower name is required for GLN entities. Entities with the Entity Type of Grower require a Grower Name. |
|
N |
S149 |
Either Physical Address or Mailing Address is required for GLN entities. |
Y |
Either Physical Address or Mailing Address is required for GLN entities. |
|
N |
S150 |
The Company or Grower Name contains an invalid, non-display character. |
Y |
The Company or Grower Name contains an invalid, non-display character. |
|
N |
S151 |
Name(s) contain an invalid special character.
See this document for a complete list.
|
Y |
Name(s) contain an invalid special character.
See this document for a complete list.
|
|
S152 |
Invalid GLN, the Non-Subscriber Owned GLN Prefix entered matches a prefix designated as an AGIIS or Subscriber Owned Prefix. |
Y |
Invalid GLN, the Non-Subscriber Owned GLN Prefix entered matches a prefix designated as an AGIIS or Subscriber Owned Prefix. |
|
Y |
S153 |
Invalid Identifier, the identifier is a duplicate of a pre-existing identifier |
Y |
nvalid Identifier, the identifier is a duplicate of a pre-existing identifier |
|
Y |
S154 |
You are not authorized to link this agreement to your product. |
Y |
You are not authorized to link this agreement to your product. |
|
Y |
S155 |
You are not permitted to link to an agreement owned by an inactive subscriber |
Y |
You are not permitted to link to an agreement owned by an inactive subscriber |
|
Y |
S156 |
Entity is in Replaced By status |
Y |
Entity is in Replaced By status |
|
N |
S157 |
Bulk transaction matched to inactive AGIIS entity |
Y |
NAPD_RETURNCODE_REJECTED |
|
Y |
S158 |
Name and\or Address contains a prohibited word, phrase, or special character.
See this document for a complete list.
|
Y |
Name and\or Address contains a prohibited word, phrase, or special character.
See this document for a complete list.
|
|
S159 |
Name Suffix is invalid |
Y |
Name Suffix is invalid |
|
Y |
S160 |
Add License not permitted using NAPD/HP ID Identifier |
Y |
Add License not permitted using NAPD/HP ID Identifier |
|
Y |
S161 |
Update of the following fields not allowed in a bulk transaction (entity classification, entity status, record status) |
Y |
Update of the following fields not allowed in a bulk transaction (entity classification, entity status, record status) |
|
Y |
S162 |
Entities with an EBID Identifier are required to have either a physical address or both mailing address and phone number.address. |
Y |
Entities with an EBID Identifier are required to have either a physical address or both mailing address and phone number.address. |
|
N |
S163 |
A License can not be updated changing the identifier type to an NAPD/HP ID Identifier |
Y |
A License can not be updated changing the identifier type to an NAPD/HP ID Identifier |
|
Y |
S164 |
Invalid identifier - an entity associated with this identifier could not be found in the directory. |
Y |
Invalid identifier - an entity associated with this identifier could not be found in the directory. |
|
Y |
S165 |
Reactivate not permitted against an entity that is in replaced by or bought out status. |
Y |
Reactivate not permitted against an entity that is in replaced by or bought out status. |
|
Y |
S166 |
Reactivate invalid, entity is already in active status. |
Y |
Reactivate invalid, entity is already in active status. |
|
Y |
S167 |
The update is not allowed because the entity is associated with a subscriber owned GLN that is not the same subscriber as the one who submitted the update. |
Y |
The update is not allowed because the entity is associated with a subscriber owned GLN that is not the same subscriber as the one who submitted the update. |
|
Y |
S168 |
The bulk transaction is rejected because it is a duplicate of another transaction submitted during the same batch. Please resubmit the transaction. |
Y |
The bulk transaction is rejected because it is a duplicate of another transaction submitted during the same batch. Please resubmit the transaction. |
|
Y |
S169 |
A PO BOX is not allowed in a physical address. |
Y |
A PO BOX is not allowed in a physical address.. |
|
Y |
S170 |
Bulk transaction matched to inactive AGIIS entity in bought out or replaced by status. Returned ID and demographics are from the Replacement Entity. |
Y |
Bulk transaction matched to inactive AGIIS entity in bought out or replaced by status. Returned ID and demographics are from the Replacement Entity. |
|
Y |
S171 |
Bulk transaction matched to inactive AGIIS entity in bought out or replaced by status. Unable to retrieve the Replacement Entity due to excessive chained replace bys. The Returned ID and demographics are from the original inactive entity. |
Y |
Bulk transaction matched to inactive AGIIS entity in bought out or replaced by status. Unable to retrieve the Replacement Entity due to excessive chained replace bys. The Returned ID and demographics are from the original inactive entity. |
|
Y |
S172 |
Agreement code must not contain non-standard ASCII characters |
Y |
Agreement code can't contain non-standard ASCII characters |
|
Y |
S173 |
Entityt Contact List Name must not contain non-standard ASCII characters. |
Y |
Entity Contact List Name must not contain non-standard ASCII characters. |
|
Y |
S174 |
Entity Contact List Name is required. |
Y |
Entity Contact List Name is required. |
|
Y |
S175 |
Product code must not contain non-standard ASCII characters. |
Y |
Product code must not contain non-standard ASCII characters. |
|
Y |
S176 |
Proprietary code must not contain non-standard ASCII characters. |
Y |
Proprietary code must not contain non-standard ASCII characters. |
|
Y |
S177 |
License code must not contain non-standard ASCII characters. |
Y |
License code must not contain non-standard ASCII characters. |
|
Y |
S178 |
Replace is not allowed when the Replaced entity has an EBID and the Replaced By entity does not have an EBID. |
Y |
Replace is not allowed when the Replaced entity has an EBID and the Replaced By entity does not have an EBID. |
|
Y |
S179 |
Replace is not allowed when the Replaced entity has a license associated with an identifier type that the Replaced By entity does not have. |
Y |
Replace is not allowed when the Replaced entity has a license associated with an identifier type that the Replaced By entity does not have. |
|
Y |
S180 |
Replace is not allowed when the Replaced and Replaced By entities have duplicate license(s) (i.e. same agreement \ effective date). |
Y |
Replace is not allowed when the Replaced and Replaced By entities have duplicate license(s) (i.e. same agreement \ effective date). |
|
N |
S181 |
Zip code in submission record (bulk file initial load process) does not match the zip code prefix of the submission file. |
Y |
Zip code in submission record (bulk file initial load process) does not match the zip code prefix of the submission file. |
|
Y |
S182 |
Directory request can't be automatically processed because the user profile of the user who submitted the request has been deleted. |
Y |
Directory request can't be automatically processed because the user profile of the user who submitted the request has been deleted. |
|
Y |
S183 |
Add directory request can't be automatically processed because an exact match of the request name and address already exists in the system. |
Y |
Add directory request can't be automatically processed because an exact match of the request name and address already exists in the system. |
|
Y |
S184 |
AGIISEntityInquiry element required for this XML transaction. |
Y |
AGIISEntityInquiry element required for this XML transaction. |
|
Y |
S185 |
Unsupported EntityInquiryActionRequest. The ActionRequest specified was valid from an XML perspective but is not supported at this time. |
Y |
Unsupported EntityInquiryActionRequest. The ActionRequest specified was valid from an XML perspective but is not supported at this time. |
|
Y |
S186 |
Mismatch between subscriber identifier in XML header and subscriber derived from UsernameToken Profile userid. |
Y |
Mismatch between subscriber identifier in XML header and subscriber derived from UsernameToken Profile userid. |
|
Y |
S187 |
All identifiers in a single IndustryIdentifier element must be associated with the same AGIIS entity. |
Y |
All identifiers in a single IndustryIdentifier element must be associated with the same AGIIS entity. |
|
Y |
S188 |
Required XML element for operation requested is missing. XML Element: |
Y |
Required XML element for operation requested is missing. XML Element: |
|
Y |
S189 |
Unsupported Bulk Processing Feature. Overrides and Exemptions are not allowed to be set in bulk transactions. |
Y |
Unsupported Bulk Processing Feature. Overrides and Exemptions are not allowed to be set in bulk transactions. |
|
Y |
S190 |
Unsupported WebServices Feature: |
Y |
Unsupported WebServices Feature: |
|
Y |
S191 |
Rural Route address requires a box number. |
Y |
Rural Route address requires a box number |
|
Y |
S192 |
Grower Name is only permitted on Growers and Farm Businesses with pre-existing Grower Name. |
Y |
Grower Name is only permitted on Growers and Farm Businesses with pre-existing Grower Name. |
|
N |
S193 |
Seed Size is required with Crop: Corn |
Y |
Seed Size is required with Crop: Corn |
|
N |
S194 |
Product Identifier is required to establish product security. |
Y |
Product Identifier is required to establish product security. |
|
Y |
S195 |
The Owner Subscriber ID for this Product is required to establish product security. |
Y |
The Owner Subscriber ID for this Product is required to establish product security. |
|
Y |
S196 |
The Subscriber ID to be secured for this Product is required to establish product security. |
Y |
The Subscriber ID to be secured for this Product is required to establish product security. |
|
Y |
S197 |
Either Grower Name or Company Name (or both) are required for 2002-Add or 2004 Demographic Search transactions |
Y |
Either Grower Name or Company Name (or both) are required for 2002-Add or 2004 Demographic Search transactions |
|
Y |
S198 |
Product Security Code invalid |
Y |
Product Security Code invalid |
|
Y |
S199 |
The web service call to add or update an entity has been rejected at this time because it would require manual review by AGIIS Member Services. |
Y |
The web service call to add or update an entity has been rejected at this time because it would require manual review by AGIIS Member Services. |
|
N |
S200 |
The update was rejected because it is already in this entity's address history |
Y |
The update was rejected because it is already in this entity's address history |
|
N |
S201 |
Verification Status is invalid. For Accepted requests with Verification Type: Member Services Verified, Verification Status must be Complete or Terminated. |
Y |
Verification Status is invalid. For Accepted requests with Verification Type: Member Services Verified, Verification Status must be Complete or Terminated. |
|
Y |
S202 |
Verification Status is invalid. For Declined requests with Verification Type: Member Services Verified, Verification Status must be Complete, Terminated, or Unverifiable. |
Y |
Verification Status is invalid. For Declined requests with Verification Type: Member Services Verified, Verification Status must be Complete, Terminated, or Unverifiable. |
|
Y |
S203 |
Verification Status is invalid. |
Y |
Verification Status is invalid. |
|
Y |
S204 |
Verification Type is invalid. |
Y |
Verification Type is invalid. |
|
Y |
S205 |
Verification Level is invalid. |
Y |
Verification Level is invalid. |
|
Y |
S206 |
Verification Billing Status is invalid. |
Y |
Verification Billing Status is invalid. |
|
Y |
S207 |
Verification Billing Status Date is invalid. When the Verification Billing Status is populated, the Billing Status Date must also be populated. |
Y |
Verification Billing Status Date is invalid. When the Verification Billing Status is populated, the Billing Status Date must also be populated. |
|
Y |
S208 |
Verification Status Date is invalid. When the Verification Status is populated, the Status Date must also be populated. |
Y |
Verification Status Date is invalid. When the Verification Status is populated, the Status Date must also be populated. |
|
Y |
S209 |
Verification Level is required. |
Y |
Verification Level is required. |
|
Y |
S210 |
Verification Status is invalid. For Entity Add\Update requests, Verification Status must be Complete or Pending. |
Y |
Verification Status is invalid. For Entity Add\Update requests, Verification Status must be Complete or Pending. |
|
Y |
S211 |
Verification Subscriber is required with Verification Type: Subscriber Verified. |
Y |
Verification Subscriber is required with Verification Type: Subscriber Verified. |
|
Y |
S212 |
Invalid Verification Subscriber. When the Verification Subscriber is populated, the Verification Type must be Subscriber Verified. |
Y |
Invalid Verification Subscriber. When the Verification Subscriber is populated, the Verification Type must be Subscriber Verified. |
|
Y |
S213 |
Invalid Verification Status Date. The Verification Status Date must be a valid date in MM/DD/YYYY format and must not be a future date. |
Y |
Invalid Verification Status Date. The Verification Status Date must be a valid date in MM/DD/YYYY format and must not be a future date. |
|
N |
S214 |
The web service call to add or update an entity has been rejected at this time because it requests verification by AGIIS Member Services and your subscriber profile is not permitted to make such requests via bulk or web service transaction. |
Y |
The web service call to add or update an entity has been rejected at this time because it requests verification by AGIIS Member Services and your subscriber profile is not permitted to make such requests via bulk or web service transaction. |
|
Y |
S215 |
Member Service Verification Level Tier 2 requires a phone number. |
Y |
Member Service Verification Level Tier 2 requires a phone number. |
|
Y |
S216 |
Verification level is valid for only Member Services verification. For all other verification types (Subscriber, Self or No verification), leave verification level blank. |
Y |
Verification level is valid for only Member Services verification. For all other verification types (Subscriber, Self or No verification), leave verification level blank. |
|
Y |
S217 |
Grower Name only allowed for Entity Classification: Consumer |
Y |
Grower Name only allowed for Entity Classification: Consumer |
|
Y |
S218 |
The presence of both Company Name and Grower Name is only permitted on Consumers with pre-existing Grower Name |
Y |
The presence of both Company Name and Grower Name is only permitted on Consumers with pre-existing Grower Name |
|
Y |
S219 |
Entity must have at least one Entity Classification |
Y |
Entity must have at least one Entity Classification |
|
Y |
S220 |
Entity Classification Location must not have any other classification |
Y |
Entity Classification Location must not have any other classification |
|
Y |
S221 |
Physical Address is required |
Y |
Physical Address is required |
|
Y |
S222 |
Either Physical or Mailing Address is required |
Y |
Either Physical or Mailing Address is required |
|
Y |
S223 |
Address requires Line1, City, State, and Postal Code. |
Y |
Address requires Line1, City, State, and Postal Code. |
|
Y |
S224 |
A PO BOX is not allowed in a Location Description |
Y |
A PO BOX is not allowed in a Location Description |
|
Y |
S225 |
Location Name is required |
Y |
Location Name is required |
|
Y |
S226 |
Location requires Location Description, City, and Postal Code |
Y |
Location requires Location Description, City, and Postal Code |
|
Y |
S227 |
The Contact List Name specified is already in use. Please specify a different name. |
Y |
The Contact List Name specified is already in use. Please specify a different name. |
|
Y |
S228 |
Entity Log Notes maximum length (19500 characters) exceeded. |
Y |
Entity Log Notes maximum length (19500 characters) exceeded. |
|
Y |
S229 |
Extract destination name is required. |
Y |
Extract destination name is required. |
|
Y |
S230 |
Both FTP and VAN fields transport properties cannot be specified in the extract profile. |
Y |
Both FTP and VAN fields transport properties cannot be specified in the extract profile. |
|
Y |
S231 |
In the hierarchial product extract in .csv format, at least one record type must be selected. |
Y |
In the hierarchial product extract in .csv format, at least one record type must be selected. |
|
Y |
S232 |
Extract name is required. |
Y |
Extract name is required. |
|
Y |
S233 |
Extract start date is required. |
Y |
Extract start date is required. |
|
Y |
S234 |
Extract User ID or Subscriber ID is required. |
Y |
Extract User ID or Subscriber ID is required. |
|
Y |
S235 |
Extract type is invalid. |
Y |
Extract type is invalid. |
|
Y |
S236 |
Extract Destination is required. |
Y |
Extract Destination is required. |
|
Y |
S237 |
Extract Frequency is invalid. |
Y |
Extract Frequency is invalid. |
|
Y |
S238 |
Extract File name is required. |
Y |
Extract File name is required. |
|
Y |
S239 |
Extract File name is invalid. Remove any special characters. |
Y |
Extract File name is invalid. Remove any special characters. |
|
Y |
S240 |
Invalid category selection for product extract, at least one category must be selected. |
Y |
Invalid category selection for product extract, at least one category must be selected. |
|
Y |
S241 |
The agreement code specified is already in use. Please specify a different code. |
Y |
The agreement code specified is already in use. Please specify a different code. |
|
Y |
S242 |
The Product Company Prefix (UCC) is required. |
Y |
The Product Company Prefix (UCC) is required. |
|
Y |
S243 |
The Product Company Prefix (UCC) is invalid, Must be non zero numeric digits between 1 and 11 characters. |
Y |
The Product Company Prefix (UCC) is invalid, Must be non zero numeric digits between 1 and 11 characters. |
|
Y |
S244 |
The Product Package Size ID is required. |
Y |
The Product Package Size ID is required. |
|
Y |
S245 |
The Product Package Level Code is required. |
Y |
The Product Package Level Code is required. |
|
Y |
S246 |
The package configuration specified is already in use. Please specify a new configuration GTIN. |
Y |
The package configuration specified is already in use. Please specify a new configuration GTIN. |
|
Y |
S247 |
The parent package size (Company Prefix + PkgSize ID) for this package configuration does not exist. |
Y |
The parent package size (Company Prefix + PkgSize ID) for this package configuration does not exist. |
|
Y |
S248 |
The Package UOM is required. |
Y |
The Package UOM is required. |
|
Y |
S249 |
The ANSI X12 package unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 package unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S250 |
The ANSI X12 base package quantity unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 base package quantity unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S251 |
The ANSI X12 child package quantity unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 child package quantity unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S252 |
The ANSI X12 weight unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 weight unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S253 |
The ANSI X12 dimension unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 dimension unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S254 |
The ANSI X12 square area unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 square area unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S255 |
The ANSI X12 cubic dimension unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The ANSI X12 cubic dimension unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S256 |
The Package Configuration cannot be activated as the package size is inactive. |
Y |
The Package Configuration cannot be activated as the package size is inactive. |
|
Y |
S257 |
The Package Configuration status cannot be active when either the package size or product status is inactive. |
Y |
The Package Configuration status cannot be active when either the package size or product status is inactive. |
|
Y |
S258 |
Package configuration User Defined Field 2 value invalid. This field has been restricted for use as Sales Reportable Indicator. Only Y, N, and blank values are allowed. |
Y |
Package configuration User Defined Field 2 value invalid. This field has been restricted for use as Sales Reportable Indicator. Only Y, N, and blank values are allowed. |
|
Y |
S259 |
Package configuration User Defined Field 3 value invalid. This field has been restricted for use as Inventory Reportable Indicator. Only Y, N, and blank values are allowed. |
Y |
Package configuration User Defined Field 3 value invalid. This field has been restricted for use as Inventory Reportable Indicator. Only Y, N, and blank values are allowed. |
|
Y |
S260 |
Reporting Unit of Measure is a required package size element for sales reportable products whose primary category is Seed. |
Y |
Reporting Unit of Measure is a required package size element for sales reportable products whose primary category is Seed. |
|
Y |
S261 |
Package size ID must be [DIGITS] digits. |
Y |
Package size ID must be [DIGITS] digits. |
|
Y |
S262 |
Package size ID must not contain special characters, only the digits 0 through 9 are allowed. |
Y |
Package size ID must not contain special characters, only the digits 0 through 9 are allowed. |
|
Y |
S263 |
Subscriber is required for a package size. |
Y |
Subscriber is required for a package size. |
|
Y |
S264 |
Product Number is required for a package size. |
Y |
Product Number is required for a package size. |
|
Y |
S265 |
Name is required for a package size. |
Y |
Name is required for a package size. |
|
Y |
S266 |
The Package Size Description must be 240 characters or less. |
Y |
The Package Size Description must be 240 characters or less. |
|
Y |
S267 |
Base quantity is required for a package size. |
Y |
Base quantity is required for a package size. |
|
Y |
S268 |
Base quantity unit of measure is required for a package size. |
Y |
Base quantity unit of measure is required for a package size. |
|
Y |
S269 |
Package quantity unit of measure is required for a package size. |
Y |
Package quantity unit of measure is required for a package size. |
|
Y |
S270 |
The package size ID specified is already in use. Please specify a different ID. |
Y |
The package size ID specified is already in use. Please specify a different ID. |
|
Y |
S271 |
The package size ANSI X12 base unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The package size ANSI X12 base unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S272 |
The package size ANSI X12 package unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The package size ANSI X12 package unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S273 |
The package size ANSI X12 reporting unit of measure does not match the UN Rec 20 unit of measure. |
Y |
The package size ANSI X12 reporting unit of measure does not match the UN Rec 20 unit of measure. |
|
Y |
S274 |
The Package Size cannot be activated as the product is inactive. |
Y |
The Package Size cannot be activated as the product is inactive. |
|
Y |
S275 |
Seed Size is required with Crop: Corn. |
Y |
Seed Size is required with Crop: Corn. |
|
Y |
S276 |
The Package Size status cannot be active when the product status is inactive. |
Y |
The Package Size status cannot be active when the product status is inactive. |
|
Y |
S277 |
The Product Number is required. |
Y |
The Product Number is required. |
|
Y |
S278 |
Product Number must not contain non-standard ASCII characters. |
Y |
Product Number must not contain non-standard ASCII characters. |
|
Y |
S279 |
Product requires Company/EBID. |
Y |
Product requires Company/EBID. |
|
Y |
S280 |
Product name is required. |
Y |
Product name is required. |
|
Y |
S281 |
EPA Registration # is required if category selected is Chemical. |
Y |
EPA Registration # is required if category selected is Chemical. |
|
Y |
S282 |
The product number specified is already in use. Please specify a different identifier. |
Y |
The product number specified is already in use. Please specify a different identifier. |
|
Y |
S283 |
Cannot select <category> as both primary and additional. |
Y |
Cannot select <category> as both primary and additional. |
|
Y |
S284 |
Variety can not be more than 128 characters long. |
Y |
Variety can not be more than 128 characters long. |
|
Y |
S285 |
Treatments can not be more than 255 characters long. |
Y |
Treatments can not be more than 255 characters long. |
|
Y |
S286 |
Traits can not be more than 255 characters long. |
Y |
Traits can not be more than 255 characters long. |
|
Y |
S287 |
The Maturity is invalid. |
Y |
The Maturity is invalid. |
|
Y |
S288 |
The Variety/Hybrid must be specified for Seed segments. |
Y |
The Variety/Hybrid must be specified for Seed segments. |
|
Y |
S289 |
The Brand must be specified for Seed segments. |
Y |
The Brand must be specified for Seed segments. |
|
Y |
S290 |
Ownership Change Date is required when Buying Company EBID is valued. |
Y |
Ownership Change Date is required when Buying Company EBID is valued. |
|
Y |
S291 |
Buying Company EBID is required when Ownership Change Date is valued. |
Y |
Buying Company EBID is required when Ownership Change Date is valued. |
|
Y |
S292 |
Buying Company EBID is invalid. The value entered does not exist as an AGIIS EBID. |
Y |
Buying Company EBID is invalid. The value entered does not exist as an AGIIS EBID. |
|
Y |
S293 |
Directory request from/through Verification Billing Status date is invalid. |
Y |
Directory request from/through Verification Billing Status date is invalid |
|
Y |
S294 |
ReplaceBy\BoughtBy entity must be active. |
Y |
ReplaceBy\BoughtBy entity must be active. |
|
Y |
S295 |
A maximum of 20 GLNs can be reported as duplicates in a single transaction. |
Y |
|
|
Y |
S296 |
GLN has been marked as inactive and is not eligible to be reported as a duplicate. |
Y |
|
|
Y |
S297 |
Proprietary code contains a prohibited special character (;). |
Y |
Proprietary code contains a prohibited special character (;). |
|
Y |
S298 |
A maximum of 99 proprietary codes per entity subset is permitted. |
Y |
A maximum of 99 proprietary codes per entity subset is permitted. |
|
Y |
S299 |
Duplicate proprietary code detected. A given proprietary code value is only permitted to appear once in a given proprietary code list. |
Y |
Duplicate proprietary code detected. A given proprietary code value is only permitted to appear once in a given proprietary code list. |
|
Y |
S300 |
Invalid Entity Identifier Type\Identifier Value combination. Non-blank Identifier Type requires Identifier Value and vice versa. |
Y |
Invalid Entity Identifier Type\Identifier Value combination. Non-blank Identifier Type requires Identifier Value and vice versa. |
|
Y |
S301 |
Service Consumer does not have privilege to access the web search {0}. |
Y |
Service Consumer does not have privilege to access the web search {0}. |
|
Y |
S302 |
The Responsible Ag GLN Proprietary Code is not allowed to be updated since this represents the Responsible Ag Facility ID. |
Y |
The Responsible Ag GLN Proprietary Code is not allowed to be updated since this represents the Responsible Ag Facility ID. |
|
Y |
S303 |
The Responsible Ag Subscriber is not properly configured. |
Y |
The Responsible Ag Subscriber is not properly configured. |
|
Y |
S304 |
Transaction cancelled because this subscriber is not allowed to add entities in GLN BUlk. |
Y |
Transaction cancelled because this subscriber is not allowed to add entities in GLN BUlk. |
|
Y |
S305 |
The Product Package Size ID is invalid, Must be non zero numeric digits between 1 and 11 characters. |
Y |
The Product Package Size ID is invalid, Must be non zero numeric digits between 1 and 11 characters. |
|
Y |
S306 |
The Product Company Prefix (UCC) and Package Size ID combined length must equal 12 characters. |
Y |
The Product Company Prefix (UCC) and Package Size ID combined length must equal 12 characters. |
|
Y |
S307 |
Address requires Line1, City and Postal Code. |
Y |
Address requires Line1, City and Postal Code. |
|
Y |
S308 |
Address line1 contains non address information. |
Y |
Address line1 contains non address information. |
|
Y |
1020 |
Address validated in multiple countries. |
Y |
|
|
1030 |
No country found by Country ID or no country set for the record. |
Y |
|
|
1040 |
Address contains at least one character that is not part of the character set supported by the engine. |
Y |
|
|
1060 |
The country identified is not supported by any of the active engines. |
Y |
|
|
1080 |
The script identified is not supported by any of the active engines. |
Y |
|
|
2000 |
Unable to identify locality, region, and/or postcode information on input. |
Y |
|
|
2010 |
Unable to identify locality and invalid postcode found. |
Y |
|
|
2020 |
Unable to identify postcode. Invalid locality is preventing a possible address correction. |
Y |
|
|
2030 |
Invalid locality and postcode are preventing a possible address correction. |
Y |
|
|
2040 |
Invalid postcode is preventing a locality selection. |
Y |
|
|
2050 |
Lastline matches are too close to choose one. |
Y |
|
|
2070 |
Bad or no postcode for locality; multiple postcodes are available. |
Y |
|
|
3000 |
Locality, region, and postcode are valid. Unable to identify the primary address line. |
Y |
|
|
3010 |
Locality, region, and postcode are valid. Unable to match primary name to directory. |
Y |
|
|
3020 |
Possible primary name matches are too close to choose one. |
Y |
|
|
3030 |
Primary range is missing on input or not in the directory. |
Y |
|
|
3050 |
An invalid or missing primary type is preventing a possible address match. |
Y |
|
|
3060 |
A missing primary type and prefix/postfix (directional) is preventing a possible address match. |
Y |
|
|
3070 |
An invalid or missing prefix/postfix (directional) is preventing a possible address match. |
Y |
|
|
3080 |
An invalid or missing postcode is preventing a possible address match. |
Y |
|
|
3090 |
An invalid or missing locality is preventing a possible address match. |
Y |
|
|
3100 |
Possible address-line matches are too close to choose one. |
Y |
|
|
3110 |
Address conflicts with postcode and the same primary name has a different postcode. |
Y |
|
|
3200 |
The building name is missing on input or not in the directory. |
Y |
|
|
3210 |
The building's address is not in the directory. |
Y |
|
|
3220 |
Possible building names are too close to choose one. |
Y |
|
|
3250 |
The building name is missing on input or not in the directory, or the range is missing on input or invalid with the input building. |
Y |
|
|
3300 |
The postcode only lookup returned multiple primary names. |
Y |
|
|
4000 |
The secondary information is missing on input or not in the directory. |
Y |
|
|
4010 |
Possible secondary address line matches are too close to choose one. |
Y |
|
|
4500 |
The organization is missing on input or not in the directory. |
Y |
|
|
4510 |
The organization's address is not in the directory. |
Y |
|
|
4520 |
Possible organization names are too close to choose one. |
Y |
|
|
5000 |
The address was valid, but the postal authority classified this address as undeliverable. |
Y |
|
|
5010 |
The address does not reside in the specified country. |
Y |
|
|
5020 |
The entire input address was blank. |
Y |
|
|
5030 |
The country's postal authority will not permit assignment due to violation of an assignment rule. |
Y |
|
|
5040 |
Assignment not made after lastline processing due to a violation of lastline assignment rules. |
Y |
|
|
5050 |
The obsolete address can be mapped to multiple addresses. |
Y |
|
|
6000 |
Unclassified error. |
Y |
|
|
7000 |
The user-defined processing timeout threshold (set in the Processing Timeout option) has been reached, preventing further corrective action on this address. |
Y |
|
|